BDSYK - EC-801B FUEL TANK SEALER (A-2)

  • MSDS: BDSYK
  • Manufacturer: 3M COMPANY
  • Product Name: EC-801B FUEL TANK SEALER (A-2)
  • National Stock Number: 8030-00-281-3827
Product Identification

Product ID:EC-801B FUEL TANK SEALER (A-2)
MSDS Date:01/01/1985
FSC:8030
NIIN:00-281-3827
MSDS Number: BDSYK

Responsible Party
3M COMPANY
3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 76381

Contractor
MINNESOTA MINING AND MFG CO, DBA 3M
SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 10 - 20%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


POLYSULFIDE RUBBER


CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192


PHENOLIC RESIN

Hazards

Effects of Overexposure:EYE:IRRIT. SKIN: DEFATTING/DERMATITIS. VAPORS:
HEADACHE,NAUSEA,DIZZINESS.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MIN,CALL A PHYSICIAN.SKIN:WASH WITH
SOAP AND WATER. INHALATION: PROVIDE FRESH AIR.

Fire Fighting

Flash Point:102F/38C (CC)
Lower Limits:1.8
Upper Limits:11.5
Extinguishing Media:CO2,FOAM,DRY CHEM

Accidental Release

Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. COLLECT
SPILLED MATERIAL.CLEAN UP RESIDUE AND PLACE IN METAL CONTAINER.

Handling

Handling and Storage Precautions:KEEP AWAY FOR HEAT,SPARKS AND OPEN
FLAME. USE ONLY WITH ADEQUATE VENTILATION TO REMOVE AND PREVENT
VAPOR BUILD.KEE CONTAINER CLOSED.
Other Precautions:AVOID PROLONG BREATHING OF VAPORS AND PROLONGED OR
REPEATED SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL EXHAUST.
Protective Gloves:RECOMMENDED
Eye Protection:CHEM GOGGLES
Supplemental Safety and Health
ADD INGRED:LITHOPONE & WATER. MFR ID CODE:62-1287-9572-1.PKG SIZE: 1 PT
PART A OF 2 PART KIT.KEY1:J1.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:175F/79C
Vapor Pres:80
Vapor Density:2.5
Spec Gravity:1.4
Evaporation Rate & Reference:2.7 (ETHER)
Solubility in Water:SLIGHT
Appearance and Odor:BLACK LIQUID - SOLVENT ODOR
Percent Volatiles by Volume:10

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO2,SULFUR COMPOUND

Disposal

Waste Disposal Methods:SEND TO HAZARDOUS WASTE MANAGEMENT FACILITY.
DISPOSE IN A SECURE LANDFILL. EPA HAZARDOUS WASTE NUMBER D-001.
LOCAL,STATE & FEDERAL REGULATIONS COMPLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.